2nd Annual(!) Barnt Green Puzzle Braai

Fast forward half an hour or so while we all head west to Barnt Green – I manage to get home before the boy-racers with their competing diesel (!) motors – three of us in the old 1400 Golf – with plenty of puzzles weighing down the boot, which isn’t useful ‘cos it’s a front-wheel drive  – so maybe they stopped for tea somewhere. 

Virtually everyone from the Warwick meeting managed to make it back to my place for the braai – which was lekker! [Good Afrikaans word for you – probably the best English equivalent to “Great!”, or “Tasty!”, or “Cool!” – it’s a versatile and efficient language is Afrikaans ...]

I managed to get the car unpacked before the first tranche of puzzlers arrived and settled them down with drinks and reminded them where the puzzles were, at which point they promptly disappeared upstairs into the study ... guess where the puzzles are!

Once everyone had pitched up, I set about getting the Weber fired up and started burning the meat – I like to set expectations low, so I’d warned them all I’d be burning the meat – that way if I got distracted at any stage, I wouldn’t disappoint! Gill and Chris(tine) had done a great job on getting the house looking somewhat patriotic with Union Jack bunting everywhere and the table nicely set with a fantastic cake in pride of place...

While the meat was burning, I managed to sneak away every now and then (the secret of a good braai is to let the fire – or gas barby – do the work for you) to do a little puzzling or chatting with the assembled puzzlers. At one stage I noticed that there were only one or two folks outside (it wasn’t raining at the time!) so I wandered back up to the study and found eight or nine folks crammed into my study playing with the puzzles – which is great – but had I known, I could have got the Guinness World Record folks along and gone for a record on the largest number of puzzlers willingly in the smallest space!

When I mentioned that to Gill the next day, she told me that at one point she’d wandered past the study and asked them why they didn’t want to spread out to the lounge or outside, at which point Chris (without the ‘tine) had given her a plaintive look and said “But there aren’t any puzzles out there”.  I suspect that she may have made a suggestion as, a few minutes later, several puzzlers appeared downstairs on the deck with a number of puzzles each – cue quite a lot of banter and puzzling on the deck.

Grub's up!

The Sandfield Salt and Pepper Shakers kept Kevin and Chris (sans ‘tine) amused for a while, and every now and then they’d ask someone a pointed question, and sometimes they got something useful in return ... although in the end they had to be opened by Ali after some serious head-scratching had failed to provide a suitable degree of assistance – I’d totally forgotten about a rather unusual technique near the end of the solution... thankfully Ali hadn’t.

Several people got conned into playing with  Peter Hajek's Matchbox puzzle, with an increasing chorus of people expressing their “horror” at “that point” in the solution – puzzlers can be cruel sometimes.

Wil had brought a couple of prototypes along to gauge interest and to test their puzzle-ness – the pair of new dovetail puzzles were a resounding hit with most folks expressing interest (and I’m sure I wasn’t the only one to offer to buy them before I realised they were only his prototypes!). Wil’s Lotus puzzle will be an absolute brute of a puzzle once he’s finished with it – he’s been working on it for a while and he keeps adding things to it so by the time he gets it into production it will be a multi-layered monster of a puzzle... he’d complicated it since the last time Louis had seen it and the extra bits did a fine job of keeping everyone out all weekend... so it might be almost good enough for Wil by now...

Abad’s Level 9 Burr entertained a few folks and Louis seemed to enjoy working through it – while Simon spent a fair amount of time on Constantin’s Nifty Fifty – although I don’t think anyone actually demonstrated a solution to that one while I was around. Brandenburg Gate seemed to amuse people with the way it seems totally impassable until you find just the right combination of positions and angles at which point it slides open in your hands...

One of the unlikeliest of puzzles that had people quiet for ages was a little Lego creation of Wil’s – three chequered oddly shaped flat bits of Lego whose object is to build a symmetrical shape with a valid pattern. Louis had managed to find a solution or two, but Wil kept goading him on by telling him there were three solutions ... and I don’t think we ever found the third one, although Wil rather kindly left a set of the pieces behind for me to play with. [Don’t ask, the answer’s “No”.] 

Amusingly, one of the puzzles that seemed to garner quite a lot of interest was the Periscope puzzle – a little wood, rope and ring entanglement puzzle that I got a couple of years ago – a couple of interlocked (really!) bits of wood allow some movement, a half-loop of rope embedded into one of the pieces of wood restricts some of the movement, and then there’s a ring that you need to extract. Quite a few folks ended up having a bash at it (successfully!) – including Wil, who had some complimentary things to say about it in Dutch to Louis (so he may well have been discussing the arrangements for travelling home the next day for all I know!) . 

A little while later I decided I'd burned the meat enough and we started feeding the massing metagrobologists. Everyone good naturedly had a go at the boerewors – even those who’d had it the year before, which I took as a good sign ... there was an even better sign later on when most folks came back for seconds! 

We cleared away the evidence and let things settle over a little more puzzling before insisting that everyone have ice cream and chocolate sauce – although there didn’t seem to be much protest at that point – I suspect they’d all come to the conclusion that resistance was futile by that point. 

Yet more puzzling  ensued after dessert, and some time after coffee, the guys who had hours of travel ahead of them began to drift off homewards – eventually leaving Chris (just Chris), Louis, Wil and I puzzling until rather late that evening before we all agreed to call it a night. 

Not surprisingly the entire household slept rather later than usual the next morning – even the hounds slept late! [That is unheard of!] Louis had done his usual of lining up the puzzles he’d solved after I’d gone to bed, on the desk for me to find in the morning (I swear that guy never sleeps!). 

Sunday turned into a fairly relaxed day lounging around the house with the visiting puzzlers, talking puzzles, trying to open Wil’s Lotus puzzle (and failing) and talking about his exchange puzzle for IPP. The five of us including Chris(tine) went down t’pub for lunch and had a really great English Sunday roast for lunch – during which Wil entertained us with some rubber band magic and an interesting take on the buttonhole puzzle, interspersed with stories of famous puzzlers from around the world and some of the crazy things he’d got up to...

When I dropped them off at the airport, they calculated that Wil had ‘lost’ about 7 kilo’s worth of puzzles over the weekend – I have absolutely no idea where they went to, m’lord...

Midlands Puzzle Party 6

Wow! – What a weekend... 

Nigel started planning the sixth Midlands Puzzle Party quite a while back – set the date for the 2nd of June, sent out the usual announcements / invitations, crossed his fingers and then sat back and waited ... actually that’s not quite the whole story – he’d cunningly set the date on a weekend that Wil Strijbos was free (no mean feat, let me tell you – that boy gets around!) – so the announcements included mention of a special guest by the name of Strijbos.

Then he sat back and waited. 

Now, to be fair, Wil was competing with the Queen – this weekend saw the celebration of her Diamond Jubilee and a few folks had other celebrations planned so they couldn’t make it ... pity – we had a cracking time!

I collected Louis and Wil from the airport on Friday afternoon and took them back to my place for some gentle puzzling, a lot of banter, some Teriyaki Chicken for dinner and then some more chatting and a lot more puzzling. In between I got to have a sneak peek into the puzzles that Wil had brought along for us to drool over, play with, and even purchase if the mood took you.

Wil had brought a Japanese “Top Spin” Top as a gift for Gill (her first puzzling thing, if you don’t count me!) and a lovely little burr from Mine called a “Little Twister” for me. Gill loves the top and I found the “Little Twister” a really cute little burr – as the name suggests, not all moves are orthogonal and it’s remarkably interesting for “just” a collar and two pieces! Those two pieces are rather oddly-shaped and more than a bit confusing – everyone who had a bash at it on Saturday seemed to enjoy it as well judging by the number of times Wil was asked if he had any more of them.  (He didn’t ... and they don’t seem to be listed on Mine’s web shop either...) 

Louis then presented me with a Coolen original puzzle box (#3) – dubbed the A-Mazing box by Wil and the first ever burr he’d made – using 1cm oak sticks – in pieces – nice bloke, eh? [I won’t say much more about those in this post, they deserve another to themselves ... and I still need to work out how to open the box!] 

While Wil and Louis amused themselves in the study with some of my toys, I trawled through Wil’s boxes for sale and found several rather appealing little numbers – including two that weren’t for sale! He’d brought a couple of new little aluminium dovetail designs to ask what we thought of them (I think 'wild enthusiasm' would sum that up rather neatly!) as well as another aluminium sequential discovery puzzle that he’s still working on – that one stumped all comers, but he’s not quite happy with it yet... keep an eye out for a Lotus Puzzle at some point – it will be good. Having found a use for all the left-over Euros from my last holiday, and added some Paypal on top of it, I had a nice little haul of new puzzles to add to the still-modest, but steadily growing hoard in the study. 

We got up reasonably early the next morning so that we could get to Warwick for 9am – although some of the others who had further to travel left considerably earlier than we did: Ali, Oli and Simon Bexfield had come across from London, Kevin had trekked down from Sheffield and Joe had joined us from deepest, darkest Wales. Add to that a few from the Midlands (Chris, Nigel, Dale Overy and I) and we were set for a good day’s puzzling... [Sam and his mate Rani – along with his partner and two children joined us a bit later.] 

We set up the tables in the centre of the room this time and that made it easier to work on a puzzle and still chat with virtually everyone else in the room. Strijbos commandeered a table and set out a bunch of plastic crates filled to the brim with puzzles for sale and that soon became the most popular end of the room, with folks combing through the crates in search of treasure – with several finding things in there they’d been looking for for a while ... 

 

Eis anyone? 

Cerradura 3D? 

A Gillen Nut and Bolt perhaps? 

All found a good home, you’ll be pleased to hear! Even I ended up salvaging a Bowling Alley in a Brief- case that I’d sort of passed up on the night before. 

I think Wil ended up doing a decent trade throughout the day, with several people acquiring a cola bottle or two to torment themselves with; several exchange puzzles and a number of special IPP31 Berlin Kugellager-ish finding enthusiastic new owners. Kevin couldn’t stop himself acquiring a sack of new Overy (?) entanglement puzzles. 

 

After the initial feeding frenzy calmed down, things settled back into our usual relaxed style of puzzle a bit, chat a lot, wind up Kevin, grab some coffee and cake (including some yummy Jubilee chocolate chocolate chip cupcakes that Gill sent along) and wind up Kevin some more ... although in fairness it wasn’t just Kevin that was getting wound up! The banter was up to its usual standards and there was plenty of laughter throughout the day (and it wasn’t all at Kevin’s expense, promise!).

One of the little things I’d picked out to buy myself the evening before was a Karakuri Fake Box as I didn’t have one yet and hadn’t actually ever seen one before ... Wil duly decided it was time for some fun and asked me if I’d really not opened one before – when I said I hadn’t, he suggested I try ... and the obvious happened: try as I might, I couldn’t open it – so I hypothesised out loud that it might not be a box, perhaps it was really just a block of wood made to look like a box, and the movement on the lid was just that, a little movement to confuse someone like me ... so Wil takes the box, puts it behind his back and gives it back to me with a Japanese coin duly inserted into it ... so much for the lump of wood theory ... and it then took me several minutes more before I finally found my way in... 

 

Flash forward half a day or so and Wil’s established that Kevin hasn’t seen one either, so he takes one out of the packaging and hands it to him, and I can see Kevin going through all the same motions that I’d gone through the night before, until he eventually declares it an alleged box as well – cue Strijbos putting the box behind his back, inserting a coin and handing it back to much mirth from the assembled masses who decided that the 10p coin inside the box now represented Kevin’s pride – so he had to retrieve it! It was his coin after all ... it turned out to be the encouragement he needed and soon enough he had the 10p out again, but not before a rather loud (sadly unprintable) “A-Ha"-ish phrase followed shortly after by loud laughter from everyone in the room, including Kevin...  if you don’t have one of these little numbers, you need one. 

 

Ali’s collection of Rocky's Bolts was another popular stop on virtually everyone’s tour around the tables and I was delighted to solve the last one in the set that had evaded me last time around – they really are superb little puzzles and miraculous unassuming little miracles of engineering and craftsmanship – I am going to have to get some to add to the little hoard at some point.

Chris and I had identical copies of Scott Peterson’s Stellated Improved Square Face for folks to play with – although I think that Ali was the only one brave enough to take one apart entirely – although the look on his face when both Chris and I looked up at the same time and commented on the fact that he’d been braver than either of us so far, was priceless – needless to say he put it all back together perfectly.  I also had a copy of Coffin’s Involution made by Scott, and the tolerances on it are that good that it took folks who know the puzzle quite a while to find the right place to start and to get some of the pieces moving during the course of the disassembly.  (I reckon they’re that beautiful that they deserve a post of their own though, so that will be along in the near future...) 

A few folks fiddled around with my three Mine’s Cubes and Ali avoided them entirely having just acquired a set of them from Wil that morning. They really put a smile on peoples’ faces. I’d taken a couple of the Rogers along at someone’s request and I was sitting absent-mindedly fiddling with Geburt when all-of-a-sardine the ball bearing dropped out and rolled across the floor – totally befuddling me! Not one to miss an opportunity, I decided I needed a photo of the puzzle in the open position, but unfortunately I didn’t have my special £2 coin with me, and realising this might confuse my regular reader, I felt the need to improvise ... when I do eventually solve it I’ll take a better picture with the correct coin, promise. 

One of the interesting little things that Wil had in his crates were a bunch of little golden balls wrapped up in tiny leather pouches  - I recognised them as Snail Balls (they have big snails in Venlo!) and invariably they were being demonstrated much to everyone’s amusement – none more so than Kevin – who’s puzzlement was unfortunately being broadcast rather widely by his facial expression of utter amazement as this little golden ball steadfastly refused to make any more than the slowest – snail’s pace – progress down an inclined ramp. I don’t think I was the only one to notice this and soon enough there were several helpful suggestions of how it was being achieved – I suggested watching Wil’s hands closely for the almost invisible thread he was using to control it, Chris suggested it was probably pixies or magic, but it might be hard to work out which – but Kevin was having none of it – amazement remained and he just kept asking how it worked... apparently pixies weren’t to blame. 

Somewhere around lunchtime about half the group wandered across to the chippy to grab some food and the rest of us carried on puzzling – prepared to fuel up on crisps, Coke, coffee and cup-cakes – safe in the knowledge that there was plenty of grub at the braai back at my place afterwards. 

After lunch Wil had some fun entertaining folks with some rather unusual pens he’d brought along – apart from puzzles, Wil also collects pens with an unusual mechanism... his favourite game on the day was giving folks a fairly innocuous looking Rotring pen and asking people to work out how it works. After a little while of them getting absolutely nowhere (pushing, twisting and all the other usual things have no effect whatsoever!) Wil then tells them rather sternly not to break it ... cue a few more minutes of sheer puzzlement, at which stage I would rather pointedly tell them to ignore what Wil had just said, and miraculously the pen would be usable in seconds – generally to loud chuckles from all looking on. 

During the course of the afternoon Sam set up a table-full of his designs and a few folks enjoyed fiddling around with them – some of those designs really are crying out to be produced in some fine woods ... Eric, are you listening? 

 

Nigel had brought his King-Cubi along - all 1500-odd moves of it and Louis couldn't stop himself ... once or twice someone would chat to him and he'd lose his way, but he managed to blast through the opening pretty darn quickly, at which point several folks crowded around to photograph the innards of this work of art - very impressive puzzle!

Things began winding down at about 3:30pm and most of us (some people had weak excuses like having to go to a 60th birthday party!) decamped back to my place for a puzzle braai at 4pm – the second of what will hopefully become an annual event ...

Handmade and Gold Revomazes

One of our bunch probably deserves a special mention for coming up with a novel reason for not coming to MPP6 – Congrats on your nuptials Russ!

Can you tell...

...that Wil Strijbos just spent the weekend at my place?

... some stories from the weekend ["Have you tried spinning it?"], including the Midlands Puzzle Party #6 should be along tomorrow  ... I need an early night after too good a weekend! :-)

Three - Four - Five

Back in January last year Eric Fuller offered some burrs linked by a bit of a theme for sale on Cubic Dissection – and I was a bit slow on the uptake and managed to miss all of them at the time – you have to be quick when Eric offers puzzles for sale, they never last long!

I’d managed to acquire a copy of Three Sticks Trapped from Oli a few months ago, but more recently I managed to pick up a copy of Four in Two and Five Piece 28 as well – completing the Three - Four - Five themed set of designs by Stéphane Chomine from that offering.  

Three Sticks Trapped is a cute little design that has three yellowheart sticks that fit into a walnut collar with a couple of little protuberances – simple! 

Or not. 

Two of the three sticks are the simplest burr piece possible (sometimes called the skeleton, it is the minimal structure – the least amount of wood to hold the two ends together) – providing maximum room to manoeuvre. The third stick has a bulge in the middle and, wouldn’t ya know it, it gets in the way all over the place.

There seems to be a lot of movement at the start – largely thanks to those skeleton pieces, and yet, in spite of that, disassembly is far from trivial! In fact, releasing the first piece takes 12 moves! 

Along the way you’ll find a neat little surprise when the pieces don’t quite come out in the way you’re expecting and even seem to contradict Pauli’s Exclusion Principle.

Neat little puzzle that isn’t nearly as simple as it ’should’ be.

Four in Two is an unusual design that has four mahogany sticks passing through two square walnut collars. Each collar has a different set of protuberances on three of the four inside faces and the sticks are anything but simple. Fourteen moves are required to extract the first piece – and it’s not the one you’re expecting!

The first seven or so moves are pretty standard, but then the split collar comes into play and things start getting a bit funky.

Once you’ve removed the first piece, getting rid of the second one takes a further seventeen moves(!), and from there on out there’s pretty much enough room to make removing the last couple of pieces fairly straight-forward.

The split-collar gives this design a really neat little twist (figurative, not literal!), allowing you to make some space to manipulate the sticks in a rather unusual manner.

(I think this is my favourite in this little series)

Five Piece 28, as you might expect, has five gum sticks through a walnut collar requiring 28 moves to release the first piece ... now the interesting thing about this design is that one of the sticks passes through the others at right angles, locking them in place in the collar.

At the start, there is a lot of movement – handily providing several blind alleys for the puzzler to lose himself down for a while... and given that there is a unique solution, there are a lot of ways not to solve this puzzle.

The solution involves not just the usual “let’s make some room” phase of solving this sort of puzzle, but adds in a little about-face that might make you think you’re doubling back on yourself and, as with the other two, there’s a bit of a surprise in how the first piece is removed – this solution is anything but linear, although no twisting is used in any of these puzzles.

A lovely little matching set of puzzles in Eric’s standard, practical size – beautifully made with just the right tolerances to stop you doing anything silly, and allowing valid moves to progress perfectly.

Thanks to Oli and Karl for letting me get my hands on this little set in the end, despite my initial tardiness!

Boards and Sticks with Frame

This 2010 Gregory Benedetti design is effectively two puzzles in one: the boards and sticks combine to form a level 9 burr, and if you build the same burr inside the confines of the frame, it rises to a level 12 burr in a frame. 

Eric Fuller made a run of these puzzles about a year ago and I was a bit slow off the mark and didn’t manage to pick one up when they were first offered. Fortunately for me, one of my puzzle-buddies was quicker off the mark than I was and a couple of weeks ago he was thinning out his collection in favour of some new glass for his other hobby, so I took it off his hands. 

It’s an interesting design given that there are two shapes of pieces (boards and sticks!) and there are six identical copies of each, with the sticks made of Leopardwood and the boards made of Bubinga – they fit inside the Wenge frame that Eric has taken a lot of trouble to reinforce – making for a nice, sturdy frame that you won’t be afraid you’ll break. All of the joints on the boards are shouldered as well. As usual, one of the pieces has Eric’s signature and the date on it. 

As you might expect from a level 12 burr, disassembly is decidedly non-trivial and the first time I took it apart I managed to ties myself in all sorts of weird and wonderful knots with bits hanging out all over the place before I finally managed to extract my first piece – and it didn’t exactly get much easier from there on either... the extra space in the frame after the first piece is removed seems to vanish and things don’t really get any easier until the next piece or two are removed ... then things loosen up a bit and it’s plain sailing to the end.

 

Reassembly is something else altogether – the ‘boards’ aren’t really boards at all – more like wide, spindly u-shaped pieces and they are wont to twist and swivel when you’re trying to get things neatly aligned during the assembly process. Things tighten up a bit as you get more and more pieces loaded into the frame until they’re pretty much forced into the right orientation – and then, bizarrely, it actually feels that working in the confines of the frame makes the assembly feel ‘easier’ – at least in the sense that everything is being held in place by the frame – of course you’re having also having to work inside the confines of the frame which makes things a little fiddlier... outside the frame, there's a killer step in the middle of the assembly where you end up trying to mate two halves while keeping everything lined up properly - remember those fine tolerances?!

Lovely little puzzle – in the classic Eric Fuller-style of lovely wood at an enjoyable size – tolerances are perfect and it’s an absolute joy to play around with.

Mine’s cubes

I first stumbled across a set of three 4*4*4 cubes by Mineyuki Uyematsu (or just Mine) at Wil Strijbos’ place last year – he described them as quite interesting and admitted that he hadn’t solved them yet, which was all the encouragement that Louis needed to throw himself at one of them … however by the time we left that evening, it remained unsolved.

The next day I happened to spot one of them (Lock-Y-Cube) in Bernhard Schweitzer’s crate of unusual puzzles at the Dutch Cube Day and helped myself to it (having paid, promise!) – I left it in Eindhoven for Louis to solve and he duly brought it back to me in December having done exactly that (apparently the mechanism was a bit ‘rusty’).

At the end of December, Wil nominated these three cubes as one of his puzzle finds of the year at Peter Hajek’s EPP, still claiming that he hadn’t solved them yet (yeah, right!). When Wil mentioned he was going to spend some time in Japan, I asked him if he’d be able to pick up copy of the other two cubes in the set for me, and a couple of days after he returned from that trip I had a copy of the Disjointed Cube and the Lock-N-Cube in my grubby paws. (Thanks Wil!!)

I’ll start with the Disjointed Cube as it’s the least sneaky of the cubes. Playing around with the cube you’ll quickly distinguish a few pieces and find that you can expand it in one direction and create some space to fiddle around with the other pieces, a bit, but not enough to really be useful. I played with it for a little bit before I noticed something a little unusual and then found I was able to remove a piece (which actually surprised me at first!). 

Having dispatched a piece, a little more movement becomes available and some manipulation will successively release the rest of the pieces.

Reassembly is reasonably straight-forward as there’s only really one piece that has to go in last and unless you’re incredibly creative, I think there’s only one way that the pieces can fit together to form a cube.

I found it quite an interesting design as it needs you to keep your eyes open and not just do the obvious, linear sort of things that you are probably programmed to do – well I am anyway!

The two Lock-Cubes are made in contrasting green and white woods with their patterns reversed, so there’s a bit of a clue that they may be related in some manner. Both cubes will expand in a similar manner to the Disjointed Cube, but that’s where the similarity ends!

These cubes seem to have pieces that are largely ring-shaped around the waist of the expanded cube, and the rings may slide up and down a bit, but they won’t do anything useful at all. There is literally no potential route out for any of the pieces… and that’s about as far as we got exploring them at Wil’s place – plenty movement – nothing useful.

Turns out they use a really sneaky, incredibly well-hidden little trick that stops you from making progress until you find it. The cubes are really well made though, so you can find clues to this lock, but you’re highly unlikely to actually spot it directly. Get past the lock, and all of a sudden there’s a whole new range of movement possible and in fact the pieces come apart fairly simply … and again, reassembly is reasonably straight-forward as there’s only really one way to build a cube from the sets of pieces, and there are few enough pieces so that the assembly itself isn’t too challenging…

Nice set of cubes, and I suspect that offering them to a puzzler together, with a suggestion that they work on the Disjointed Cube first might just maximise the puzzling pleasure… and surprise. 

Link to Mine's Shop for those who're interested - via Google-Translate: 

• Disjointed Cube
• Lock-Y-Cube
• Lock-N-Cube
  

'Just' a couple o’ 6-piece burrs

I’ve recently come across a couple of rather interesting, if not innocuous-looking six-piece burrs. 

The first is a copy of Bill Cutler’s L5 Notchable Burr. One of my puzzling buddies recently decided to slim down his collection a bit and spend the proceeds on some camera equipment – and it would have been rude not to support his new venture, so I bought a few puzzles from him, including this one. 

Giving credit where credit is due, Bill’s website lists this design as being “Discovered by computer program in 1987” – coyly avoiding to mention the fact that he happened to have written the program to explore the possibilities and is the guy who’d been studying these burrs in more depth than anyone else around – so I reckon we can all agree that this is Bill’s design, so what if he used some of the newer tools available to designers. 

As the name suggests, it’s a level 5 burr (i.e. minimum of five moves to remove the first piece) consisting of only notchable pieces (i.e. pieces that can be cut simply by taking notches out of a stick) and it has a unique solution – in fact, it isn’t possible to construct a burr from notchable pieces to give a higher level solution – but there are other notchable designs with the same level... 

This one was made by Jerry McFarland and one of the mahogany pieces has his customary JM stamp on it ... along with the digits ‘71’ – which confuses me as I don’t think it refers to the design, and it can’t be when it was made... any thoughts?

It’s a fun little burr to play with - in spite of it ‘only’ having a level 5 solution, assembling it is a pretty decent challenge, and taking it apart involves a good degree of progressively opening it up more and more before the first piece will emerge – really interesting little burr – and a good spot among the thousands that Bill’s analysis must have thrown up.

The second burr came to me by a slightly more circuitous route – all-round Burr-wizard Guillaume Largounez (yip, the same guy who facilitated those monster burrs!) got in touch a little while back and asked if I was interested in a copy of Abad’s Level 9 burr. 

As it wasn’t a name that I recognised, I did a little surfing and had a look at the pieces laid out on Ishino’s web-site – and one look at the pieces will show you why it’s now a well-known design ... a point that Guillaume made in his email – those pieces are a serious challenge to manufacture! Comparing these pieces to the notchable ones above is like comparing chalk and cheese – a couple of these pieces require all sorts of wood-working shenanigans to get a square corner in there. 

Guillaume had convinced Maurice Vigouroux (yip, him again) to make up a few of these in Satin Bloodwood and after a small dent hit my bank account, one of them duly headed in my direction.

This is a mean little burr... assembled on the shelf it looks like any other standard six-piece burr – but start playing with it and it gets your attention rather quickly – there’s a lot you can do with these pieces, and a few blind alleys to get lost down. The solution appears to consist of a couple of stages where you start by opening things up a bit, then move a piece or two ‘out of the way’ before opening it up some more and eventually, nine moves in, the first piece comes free – at that point you won’t be surprised that it pretty much crumbles in your hands when you see quite how far apart all the bits are at that stage. 

A really interesting burr designed by Rafael Guarinos Abad and expertly made by Maurice Vigouroux – very chuffed to have one of those in my collection – a really unusual little guy.

Oskar’s Domino Tower

Several seriously talented craftsmen have produced versions of Oskar van Deventer’s Domino Tower. According to the pencil signature, my recently acquired copy was made by Tom Lensch in 2006, but other versions have been produced by Scott Peterson and John Devost. 

Oskar’s design is delightfully simple with four identical pieces, each consisting of 6 domino-shaped blocks, that interlock to form a tower. Given the size and shape of the pieces, you’re almost certainly going to pick up the tower in a grip that will push the pieces together, which might leave you a little confused for a short while. 

A bit of experimenting, particularly with less obvious ways of gripping the pieces, will soon have the four parts sliding apart until they collapse in a pile ... and unusually, putting them back together is almost easier than taking them apart – applying either a little bit of coordinate motion or a couple of moves to make space for the last piece...

Most of the fun is to be had in playing with the bits and experimenting with alternative ways of putting the pieces together to form different sorts of interlocking shapes and experimenting with different patterns and colouring on the shapes you’ve made. 

I reckon that Oskar’s Domino Tower is the wooden puzzle-equivalent of a stress ball or worry beads – therapeutic to just fiddle with and play around with the pieces sliding across one another...

Roger’s Wasserhahn

My copy of Roger’s Wasserhahn (literally the German for ‘tap’, or ‘faucet’ if you speak the other version of English) has been staring at me from my shelf-of-puzzles-to-be-solved for months now. Every now and then I’ve fancied a shot at it and tried to come up with something new, and every time I’ve been disappointed…until this past weekend.

Wasserhahn has a copper coloured spout coming out of the front of the standard Roger-sized block – and there are a pair of wing-nut-headed bolts screwed into the top of the block on either side of the spout. The spout will spin around freely no matter what you do to the puzzle, and peering into it doesn’t give anything away  … unless, maybe, you could peer around the bend in the spout, and shine a light in there while you’re at it – flexible endoscope anyone? (Nah, didn’t think so … that just wouldn’t be cricket, would it?) The bolts can be screwed in and out about an inch each, with no discernible effect whatsoever. In the innards, you can hear something that sounds a lot like a ball bearing, and probably something else, that doesn’t sound like a ball bearing – more like a small strip of metal sliding around in a channel of some sort.

As is customary with Rogers, the puzzle doesn’t come with any instructions or clues (although I have heard they used to come with solutions!), but if there were to be an aim, I’d guess it would be something like “Free the water” – entirely logical for a tap, not so?

Anyway, there I was, occasionally playing with it over the course of several months, and getting nowhere, when one day Wil Strijbos was playing with one of them and asked me if I had one (and the thought crossed my mind to deny all knowledge of the puzzle and buy one from him, effectively restarting the clock on my failure to solve it!) – I admitted I did and that it was defeating me, so he stared me in the eye while chatting about something else and began fiddling around with his copy out of sight and then promptly brought it out from behind his back having supposedly (!) removed a ball bearing from it – a little drop of water from the tap. I was more than a little gobsmacked – not only had he done this right under my nose, he’d been chatting to me at the time about something else entirely and didn’t seem to be concentrating particularly hard on opening it, yet he’d literally just solved it there and then … like a damn good close-up magician.

I struggled for a few more months after that, and still got absolutely nowhere – in fact Wil’s helpful demonstration probably did more to throw me off the scent than actually help me, as I subsequently discovered. I’m sure he didn’t mean to do that, just a fortunate by-product… :-) 

Ages later I was chatting to Nigel about this puzzle (he’d recently come across one as well) and he said something that made me ask a couple of questions – which in turn rapidly led me to the solution – and I’m really glad we talked, because there is absolutely no way I’d ever have found that solution on my own – I would simply never have done that to one of my puzzles (!) – which is saying quite a lot as I have a reputation for being a bit ham-fisted. I’d already tried tapping, bashing and knocking things – sometimes enthusiastically! I’d spun various things, many ways, shook it senseless – nothing!

However, having had the seed sown in my mind during that chat, I solved it in one hand while holding the phone in the other and chatting to Nigel … but I’d never have got to it on my own… Thanks for the nudge, Nigel – you’ve helped me free up a little space on that shelf.

Postscript: It seems that a few folks have been led to try and drown their puzzles after reading my blog - please don't - while I don't think you'll do any long term damage, it won't help and that's not what I was alluding to. And shame on you! :-) 

Eis puzzle

I was delighted a little while back when an opportunity to acquire a copy of Roger’s Eis puzzle fell into my lap. I’d first read about it on Rob Stegmann’s website – notably the fairly recent story of how this puzzle has remained unsolved in his collection for ages, until a friend miraculously opened it – and how even after studying it opened, he still struggled to repeat the solution back at home. Suffice it to say that this story filled me with no small amount of respect for this puzzle, and a fair amount of trepidation when I started playing with it.

The puzzle looks like a kids’ ice lolly – hence the name – with a brass stick protruding out of the end of an aluminium lolly. Close examination of the lolly bit shows that it’s made up of two parts that overlap and join in the centre. The brass stick bit can be rotated and sometimes pushed in and out of the lolly bit… and when it’s quite far out, the two bits of the lolly feel a little looser – suggesting that you’re trying to disassemble the puzzle.

I took my copy of Eis along to our last Midlands Puzzle Party and a few folks had an unsuccessful bash at solving it … and it was one of the Rogers being played with at James D’s Easter Saturday Puzzle Party down in Devon. At one point Oli was fiddling around with it and all of a sudden a flash of inspiration flew across his face and he said “this thing’s a Revomaze!” – and sadly that actually meant quite a lot to a few of us. He described something that he was feeling in the movements in Revo-speak and it made sense (walls, paths, traps and resets anyone?), and a couple of minutes later he had the thing open in bits on the table! [He was on a bit of a roll that day – and that wasn’t the only tough Roger puzzle he solved that afternoon!] Simply amazing …

I had a look at the bits and thought I’d recognised some of those Revo-like features (remember this puzzle pre-dates Revomazes by at least a decade!) before Oli reassembled it only for it to remain closed for the rest of the day.

Back at home I had a quick fiddle with my copy again and got absolutely nowhere before setting it aside until last Sunday, when I decided that I should approach it like it was a Revomaze, and try some rudimentary mapping of what was going on inside there … so armed with my trusty Sharpie pen, I started sketching out some paths on the brass shaft (it’s a Revo-puzzle now, not an ice lolly!) and soon enough found that I could explore some new areas and go where my little map suggested I shouldn’t be able to … which got me to the point where I could pull the shaft right out and open the two aluminium parts – job done!

Examining the innards of this puzzle has given me a huge amount of respect for Roger’s eye for engineering design. He’s used several elegantly simple ideas in a very restricted space to make a rather interesting little maze – one that you cannot navigate by luck. The symmetry in the pieces is beguiling and in fact a careful analysis of the outside of the puzzle will actually help you understand the insides – although you may not realise that until it’s too late! 

The implementation of the “springy bits” is one of the most sublimely elegant solutions imaginable … except I wouldn’t have imagined it in a million years! … and the kicker – you could show someone a picture of the bits and they will still struggle to open this puzzle – witness the fact that Rob has a picture of the bits on his website, I looked at them when Oli opened it and it still defeated me until I took out my trusty Sharpie pen – well that’s my story, and I’m sticking to it!